Seat Covers

Generic CS Seat Covers

White or transparent polyethylene

Generic with standard slogan (in the desired language) or logo of your choice (“Service with a Smile”, etc.) or only car brands. Packaged in convenient tear-off rolls, pre-welded and punched. Available in different sizes and thicknesses.

Material: white or transparent polyethylene.

  • Extended protection from stains or grease
  • Standard slogan or generic graphics
  • 3 repeated printings (seat cover 70x165 cm)
  • Packaged in rolls from 125 to 500 pieces
  • Thickness from 30 µm to 10 µm (micron)
  • One or more automotive brands
ArticleProduct DescriptionTechnical FeaturesDimensions
0130125GENRoll of 125 LDPE seat coversThickness: 30 mccm. 70 x 165 (base x height, double)
0120250GENRoll of 250 LDPE seat coversThickness: 20 mccm. 70 x 165 (base x height, double)
0120125GENRoll of 125 LDPE seat coversThickness: 20 mccm. 70 x 165 (base x height, double)
0113250GENRoll of 250 LDPE seat coversThickness: 13 mccm. 70 x 165 (base x height, double)
0110250GENRoll of 250 HDPE seat coversThickness: 10 mccm. 70 x 165 (base x height, double)

GENERAL CATALOG

Download our complete catalog with all products.


WHAT DOES IT MEAN FOR “GENERIC”?

On a generic product it is allowed to print standard slogans (in the desired language) and / or one or more car brands or a special graphic among our proposals.

If you want to print your own logo or specific graphic it is necessary to refer to a customized product.


DO YOU NEED INFORMATION?

Feel free to contact us. We will answer all your doubts and tell you about one of our dealers.

+39.0141.875008


Ask for a
Free Quote

Custom CS Seat Covers

White or transparent polyethylene

Personalized with brands and logos on customer request. Packaged in convenient tear-off rolls, pre-welded and punched. Available in different sizes and thicknesses.

Material: white or transparent polyethylene.

  • Extended protection from stains or grease
  • Customer graphics and logos (up to 6 colors)
  • 3 repeated printings (seat cover 70x165 cm)
  • Packaged in rolls from 125 to 500 pieces
  • Thickness from 30 µm to 10 µm (micron)
  • Once cliché contribution
ArticleProduct DescriptionTechnical FeaturesDimensions
0130125PERRoll of 125 LDPE seat coversThickness: 30 mccm. 70 x 165 (base x height, double)
0120250PERRoll of 250 LDPE seat coversThickness: 20 mccm. 70 x 165 (base x height, double)
0120125PERRoll of 125 LDPE seat coversThickness: 20 mccm. 70 x 165 (base x height, double)
0113250PERRoll of 250 LDPE seat coversThickness: 13 mccm. 70 x 165 (base x height, double)
0110250HDPERRoll of 250 HDPE seat coversThickness: 10 mccm. 70 x 165 (base x height, double)

GENERAL CATALOG

Download our complete catalog with all products.


WHAT DOES IT MEAN FOR “CUSTOMIZED”?

On a customized product, it is allowed to print your own logo or specific graphics, also combined with car brands.


DO YOU NEED INFORMATION?

Feel free to contact us. We will answer all your doubts and tell you about one of our dealers.

+39.0141.875008


Ask for a
Free Quote

"Ecocare" Line Seat Covers

Bio & comp material

Love for nature, respect for the landscape, harmony between tradition and innovation: these have always been the founding values of our efforts to sustainability. Because quality of the environment and of living are inseparable.

We have studied a further line in an even more eco-sustainable perspective: the ECOCARE line that has been realized with all the attention dedicated to the environment and raw material, so that the final consumer can use our products while still guaranteeing an lower environmental impact.

Engaging in the environmental field in Gammaplast means guaranteeing the biodegradability of the products that are sold, participating in checks on the composition of raw materials. In a word: compostability certification according to UNI EN 13432: 2002, license code S481.

Generic printing with “Ecocare” logo or customized with customer graphics.

Material: biodegradable & compostable.

  • Extended protection from stains or grease
  • "Ecocare" generic logo
  • Customized printing with customer graphics

bio & comp material: conservation and durability

The biodegradable and compostable products according to EN 13 432, if properly stored in a dry place, have an effective life of 15 months about. This provided that the common good conservation rules are respected. In fact, they should be kept away from sources of heat and direct light. Heat and UV rays are factors that influence the degradation of materials, both biopolymers than conventional plastics of fossil origin. After this period they may be subject to degradation, which means they can break more easily.

ArticleProduct DescriptionPrintingDimensions
0113BC125GENRoll of 125 BIO&COMP seat covers 13 mcGeneric ECOCARE logocm. 70 x 165 (base x height, double)
0113BC250GENRoll of 250 BIO&COMP seat covers 13 mcGeneric ECOCARE logocm. 70 x 165 (base x height, double)
0113BC125PERRoll of 125 BIO&COMP seat covers 13 mcCustomizablecm. 70 x 165 (base x height, double)
0113BC250PERRoll of 250 BIO&COMP seat covers 13 mcCustomizablecm. 70 x 165 (base x height, double)
0113BC125SSRoll of 125 BIO&COMP seat covers 13 mcWithout printingcm. 70 x 165 (base x height, double)
0113BC250SSRoll of 250 BIO&COMP seat covers 13 mcWithout printingcm. 70 x 165 (base x height, double)

GENERAL CATALOG

Download our complete catalog with all products.


OUR CERTIFICATIONS

The strong sensitivity towards the protection of the ecosystem takes the form of the selection of materials and partners that best meet the needs of an eco-sustainable environmental management.


Ask for a
Free Quote

CTR Rear Seat Covers

White polyethylene

The universal disposable CTR rear seat cover is made of white waterproof HDPE, prevents contamination by pathogens by covering the entire surface of the rear seats for a total protection.

Adaptable to any sitting, it covers all the seats in the front, while a first upper pocket allows positioning by “hooking” to the headrest and a second pocket in the lower part allows fixing, so as to adhere to the seat preventing it from sliding.

The use of this protective device can ensure regular customer turnover and protect areas otherwise difficult to clean and/or sanitize.

For the use of this product on station wagon or two-volume cars, it is recommended to fold the backrest, hood the deeper pocket and reposition the backrest.

For the use of this product on three-volume cars, if the backrest cannot be folded down, it is recommended to raise the rear head restraints and hood the deeper pocket on the head restraints.

The seat cover can be customized with a print on request.

Packaged in pre-cut rolls of 150 seat covers packed in carton boxes. Size: 160×134 cm.

Material: white or transparent polyethylene.

  • Impermeable and universal
  • Prevents contamination by pathogens
  • Thickness 10 µm (micron)
  • Adaptable to any sitting
  • Customizable with a print on request
  • 4 repeated printings
ArticoloDescrizione prodottoCaratteristiche tecnicheDimensioni
0110150POSSRoll of 150 rear seat covers HDPE without printingThickness: 10 mccm. 160 x 134 with headrest pocket and seat pocket
0110150POSTRoll of 150 rear seat covers HDPE customizedThickness: 10 mccm. 160 x 134 with headrest pocket and seat pocket

GENERAL CATALOG

Download our complete catalog with all products.


DO YOU NEED INFORMATION?

Feel free to contact us. We will answer all your doubts and tell you about one of our dealers.

+39.0141.875008


Ask for a
Free Quote

Generic CT Seat Covers

White or transparent polyethylene

Generic with standard slogan (in the desired language) or logo of your choice (“Service with a Smile”, etc.) or only car brands.

In order to create a cheaper product without renouncing the functionality of the classic model and a quality customization, we designed this new version with 2 pockets: the CT model.

It covers the whole seat in the front, while in the back two pockets allow the positioning “hooking” to the headrest and the lower part of the seat.

On the CT seat cover the print appears only once on the upper part of the seat cover, with a maximum use of 2 printing colors.

Packaged in convenient tear-off rolls, pre-welded and punched. Dimensions: 80×135 cm.

Material: white or transparent polyethylene.

  • Protection against stains or grease
  • Slogan "We have taken good care of your car"
  • Generic graphics chosen from our proposals
  • Thickness from 10 µm to 20 µm (micron)
  • One or more automotive brands
  • Single top print only
ArticleProduct DescriptionTechnical FeatureDimensions
0110250HDCTSTRoll of 250 printed HDPE seat coversThickness: 10 mccm. 80 x 135 with headrest pocket and seat pocket
0110500HDCTSTRoll of 500 printed HDPE seat coversThickness: 10 mccm. 80 x 135 with headrest pocket and seat pocket
0113250CTSTRoll of 250 printed LDPE seat coversThickness: 13 mccm. 80 x 135 with headrest pocket and seat pocket
0113500CTSTRoll of 500 printed LDPE seat coversThickness: 13 mccm. 80 x 135 with headrest pocket and seat pocket
0120250CTSTRoll of 250 printed LDPE seat coversThickness: 20 mccm. 80 x 135 with headrest pocket and seat pocket
0120500CTSTRoll of 500 printed LDPE seat coversThickness: 20 mccm. 80 x 135 with headrest pocket and seat pocket

GENERAL CATALOG

Download our complete catalog with all products.


WHAT DOES IT MEAN FOR “GENERIC”?

On a generic product it is allowed to print standard slogans (in the desired language) and / or one or more car brands or a special graphic among our proposals.

If you want to print your own logo or specific graphic it is necessary to refer to a customized product.


DO YOU NEED INFORMATION?

Feel free to contact us. We will answer all your doubts and tell you about one of our dealers.

+39.0141.875008


Ask for a
Free Quote

Custom CT Seat Covers

White or transparent polyethylene

Personalized with brands and logos on customer request.

In order to create a cheaper product without renouncing the functionality of the classic model and a quality customization, we designed this new version with 2 pockets: the CT model.

It covers the whole seat in the front, while in the back two pockets allow the positioning “hooking” to the headrest and the lower part of the seat.

On the CT seat cover the print appears only once on the upper part of the seat cover, with a maximum use of 2 printing colors.

Packaged in convenient tear-off rolls, pre-welded and punched. Dimensions: 80×135 cm.

Material: white or transparent polyethylene.

  • Protection against stains or grease
  • Customer graphics and logos (2 colors max)
  • Thickness from 10 µm to 20 µm (micron)
  • Single top print only
ArticoloDescrizione prodottoCaratteristiche tecnicheDimensioni
0110250HDCTSTRoll of 250 printed HDPE seat coversThickness: 10 mccm. 80 x 135 with headrest pocket and seat pocket
0110500HDCTSTRoll of 500 printed HDPE seat coversThickness: 10 mccm. 80 x 135 with headrest pocket and seat pocket
0113250CTSTRoll of 250 printed LDPE seat coversThickness: 13 mccm. 80 x 135 with headrest pocket and seat pocket
0113500CTSTRoll of 500 printed LDPE seat coversThickness: 13 mccm. 80 x 135 with headrest pocket and seat pocket
0120250CTSTRoll of 250 printed LDPE seat coversThickness: 20 mccm. 80 x 135 with headrest pocket and seat pocket
0120500CTSTRoll of 500 printed LDPE seat coversThickness: 20 mccm. 80 x 135 with headrest pocket and seat pocket

GENERAL CATALOG

Download our complete catalog with all products.


WHAT DOES IT MEAN FOR “CUSTOMIZED”?

On a customized product, it is allowed to print your own logo or specific graphics, also combined with car brands.


DO YOU NEED INFORMATION?

Feel free to contact us. We will answer all your doubts and tell you about one of our dealers.

+39.0141.875008


Ask for a
Free Quote